{"product_id":"floating-center-cap-universal-base","title":"Universal Floating Center Cap Base 60mm \/ 70mm","description":"\u003ch2\u003eA universal base that turns your own center caps into floating center caps!\u003c\/h2\u003e\n\u003cp\u003eEven if your wheels are not on our fitment list, this base may fit if the dimensions match. The center cap (ornament) is not included. You modify and reuse your own center caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe mechanism is protected under Japanese Utility Model Registration No. 3256953.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eAbout this product\u003c\/h3\u003e\n\u003cp\u003e- \u003cstrong\u003eYou choose this product by its dimensions\u003c\/strong\u003e, not by wheel model. Please compare the dimensions below with your own wheels and decide for yourself whether it will fit.\u003c\/p\u003e\n\u003cp\u003e- Modifying the base or your caps may be required for installation. Any modification is at your own responsibility.\u003c\/p\u003e\n\u003cp\u003e- Wheels we have confirmed, such as the WORK 60mm series (Seeker, LANVEC, etc.) and the GNOSIS series, have their own dedicated product pages. If your wheels are on our fitment list, please choose those instead.\u003c\/p\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\u003cth\u003eItem\u003c\/th\u003e\u003cth\u003e60mm\u003c\/th\u003e\u003cth\u003e70mm\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eBase plate diameter\u003c\/td\u003e\u003ctd\u003e60.0 mm\u003c\/td\u003e\u003ctd\u003e69.5 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePlate thickness\u003c\/td\u003e\u003ctd\u003e1.4 mm\u003c\/td\u003e\u003ctd\u003e1.4 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eOverall height (bottom to tab tip)\u003c\/td\u003e\u003ctd\u003e9.4 mm\u003c\/td\u003e\u003ctd\u003e9.4 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNumber of tabs\u003c\/td\u003e\u003ctd\u003e6 (every 60°)\u003c\/td\u003e\u003ctd\u003e4 (every 90°)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eTab width\u003c\/td\u003e\u003ctd\u003eapprox. 13.5 mm\u003c\/td\u003e\u003ctd\u003eapprox. 14.5 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eTab height\u003c\/td\u003e\u003ctd\u003e8.0 mm\u003c\/td\u003e\u003ctd\u003e8.0 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eTab outer diameter (root)\u003c\/td\u003e\u003ctd\u003eø52.0 mm\u003c\/td\u003e\u003ctd\u003eø56.0 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eTab outer diameter (hook)\u003c\/td\u003e\u003ctd\u003eø54.0 mm\u003c\/td\u003e\u003ctd\u003eø58.6 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eHook height\u003c\/td\u003e\u003ctd\u003e5.1–6.5 mm\u003c\/td\u003e\u003ctd\u003e4.1–4.8 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eTab inner diameter\u003c\/td\u003e\u003ctd\u003eø48.0 mm\u003c\/td\u003e\u003ctd\u003eø52.0 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*Heights are measured from the top surface of the base plate (except overall height).\u003c\/p\u003e\n\u003cp\u003e*The 70mm base has four low ribs between the tabs (outer diameter ø54.0–57.2 mm, height 3.0 mm).\u003c\/p\u003e\n\u003cp\u003e*Listed dimensions have a manufacturing tolerance of about ±1%.\u003c\/p\u003e\n\u003ch3\u003eThree measurements to take on your wheel\u003c\/h3\u003e\n\u003cp\u003e1. \u003cstrong\u003eInner diameter of the center cap bore\u003c\/strong\u003e: must be larger than the base plate diameter.\u003c\/p\u003e\n\u003cp\u003e2. \u003cstrong\u003eInner diameter where the tabs hook\u003c\/strong\u003e: must be larger than the tab root diameter and smaller than the hook diameter. The tabs flex inward and the hooks catch.\u003c\/p\u003e\n\u003cp\u003e3. \u003cstrong\u003eDepth from the bore floor (where the base plate sits) to where the tabs hook\u003c\/strong\u003e: must fall within the hook height range.\u003c\/p\u003e\n\u003ch3\u003ePlease note\u003c\/h3\u003e\n\u003cp\u003e*Available as a single piece or as a set of 4 (one car). The set of 4 is better value.\u003c\/p\u003e\n\u003cp\u003e*Sold while stock lasts. If sold out, the next release date is undetermined.\u003c\/p\u003e\n\u003cp\u003e*\u003cstrong\u003eWe cannot accept returns or exchanges if the base does not fit, has been modified, or the modification failed.\u003c\/strong\u003e Returns and exchanges are accepted only for initial defects (such as cracked tabs or rotation failure before installation).\u003c\/p\u003e\n\u003cp\u003e*We cannot verify fitment for individual wheels.\u003c\/p\u003e\n\u003cp\u003e*On vehicles where the drive shaft protrudes, the cap may interfere.\u003c\/p\u003e\n\u003cp\u003e*For assembly, please refer to the instruction manual (shared by VS \/ 60mm \/ 70mm).\u003c\/p\u003e\n\u003cp\u003e*Orders placed in error cannot be exchanged or returned.\u003c\/p\u003e","brand":"GRAVITY","offers":[{"title":"60mm \/ Single piece","offer_id":67962025836770,"sku":"FCC-GEN-60PHI-B-1","price":3300.0,"currency_code":"JPY","in_stock":true},{"title":"60mm \/ Set of 4 (one car)","offer_id":67962025869538,"sku":"FCC-GEN-60PHI-B","price":9900.0,"currency_code":"JPY","in_stock":true},{"title":"70mm \/ Single piece","offer_id":67962025902306,"sku":"FCC-GEN-70PHI-B-1","price":3300.0,"currency_code":"JPY","in_stock":false},{"title":"70mm \/ Set of 4 (one car)","offer_id":67962025935074,"sku":"FCC-GEN-70PHI-B","price":9900.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0775\/5949\/6930\/files\/PXL_20260401_012939268_82c748b9-63eb-4534-b8f5-01e0ee0fc29c.jpg?v=1775832132","url":"https:\/\/shop.gravityinc.co.jp\/en-asia\/products\/floating-center-cap-universal-base","provider":"GRAVITY ECストア","version":"1.0","type":"link"}